Consumer Electronics Review

Landscape photography approach can be summarized as two words:

Liushui — Fri, 17 Feb 2012 01:57:29 +0000

Landscape photography approach can be summarized as two words: knowledge, concept, list, and now (that is, knowing when the concept of the potential, indicate its quality, is the Wei).

1, knowing when

“Time” in the broad and narrow sense, respectively. Broadly speaking, refers to the seasonal spring, summer, autumn and winter. We all know, the nature and decorated colorful flowers and trees, their breeding, thriving, litter, all the changes with the timing of climate change. So beautiful scenery the same location,Dell Vostro 1000 laptop battery four seasons have different views of characteristics (such as Jiuzhaigou, Sichuan, Anhui, Huangshan, etc.), but also with the climate shift with the seasons and showed a different attitude and unpredictable. Even the clouds floating in the sky, are displayed in front of the spectacular wonders of depicting, and directly with the rain and the cloud is closely related to fog. These are the general picture of nature, but the shape of cloud and rain and potential, and indeed the different seasons. So you want to show the nature, but also with typical scenery, this generalized “time”, they can not refine analysis, in-depth understanding can be effectively and grasp the right time.

The narrow meaning of “time”, is the day from morning to evening, even at night. The most important condition is the source photography, and shooting by the light of the nature and scenery,battery for HP Compaq Business Notebook nx8220 but it is only sunshine. Therefore, should this only source of light, non-photographer is in charge, and to appropriate use. First, the direction of seasonal light source and may be projected onto the place and position to understand the ascent of the West generally only know the sun down, in fact, the direction of movements which are moving with the seasons, so the light changes also directly affect the screen the effect of the location of the winter sun is biased towards the south, and projection bias North; summer sun has rose from the north, south Shimoji is fired. Variation between the two locations are moving very little, as one year as the sun rises from the east, only two days (March 21 equinox, September 23 Autumnal Equinox), the daily change 0.258 degrees.

Have the effect of light on the scene, even if only a fine line difference, but all very different, then the only reliable shooting natural scenery of the sun, lifting its position on the projection of the direction, not only must be clear, and absolutely essential .

2, the view of its potential

Is observed throughout the environment and the shooting scene situation.price of Dell Inspiron Mini 9 battery You know, when we’re in the embrace of nature, across such scenes, already the twists and miscellaneous array, which should be deleted, that should be choice, as to adopt the position of King, the best angle is not a hasty decision can be made between . Therefore, we must carefully patiently, not tired of the trouble, fear their workers to and from any location and angle to explore. Deep view of the Mocha, combined with experience to select the ideal angle to shoot the scene in mind is to lay the draft, followed by addition to meticulous tailoring. The so-called window dressing cut to place the most also pay attention to, not negligence. Regardless of a grass with one stone, a leaf, needs to be included in the scope of scrutiny. Because the show for a long time in the open case seemingly insignificant things and no important place, when the perfect piece of work requirements, often plays a role in the construction and destruction of the extreme. Therefore, the election scene and taken to very detailed. Painter Huang Bin said: “vertical travel landscape, we must have vacated the dynamic days, but also to find a monk’s cassock static fill.” Means that the scene before we have a tremendous enthusiasm, tireless running around everywhere to observe, look for King, chief representative to follow is to think about, to understand the immediate landscape, to understand these views. Painters also says: “There are thousands peaks, so spectacular, it’s landscape ever such, there are hundreds of samples per individual.” Therefore, we observe the mountain, scenery, and not stay on the surface, HP Compaq Business Notebook nx8220 Replacement batterymore attention is the mountain views momentum with local characteristics, the Five Dynasties era painter Jing Hao said: “The search really wonderful record.” Miao is the objective reality, subjective search is the author’s efforts. These are the previous experience of artists, to teach us is a insult.

3, table the matter

Comes to the table its quality, we all know everything has its unique nature, particularly natural landscape shot, for the natural environment is full of flowers, grass, wood, stone, mud have to deeply understand the nature and familiar and grasp its essence, to effectively reproduce the images in the photo. Predicate in our photography thing so-called “texture” means that the texture of the scene or object in the performance requirements of the time, not only have the outline of its shape,EliteBook 2740w battery it is important to aim to have a qualitative sense of the performance of both bones, and meat.

4, view the magnificent

This “Wei” meaning the word is very broad, like the magnificent, extraordinary transmission and so on. Shooting mountains, towering trees, etc., they can use camera angles to go up to “Wai” the art of composition, comparative methods can also be set off to the “Wei” more highly visible. The “Great” in another sense, you can also extended to the United States, to give outstanding views of the most beautiful place is also now its “Wei” in a category. So, we took pictures on how to view the scenery, “Wei” mean? The key lies in grasping the characteristics of features, style.

Such as Huangshan, there are four characteristics: the sea of clouds,HP Compaq Business Notebook NX6140 laptop battery clouds, pines, rocks. But we have vision into a big place there each with wonders, each with three odd risk thirty-six Shiliu Da peak and small peaks; if the horizon a little place, many of melancholy gray of the forest to clear deep also The Rock Valley. Then sight back side, there are lots of free small scene, all in all, are based on ecstatic.

As the name Mount Emei, is dark green show, Castle Peak can be said to have a quiet and beautiful. As the saying is but majestic towering, rugged majestic it. Landscape under heaven known as known as Guilin, Yangshuo numerous even than Guilin, but also is the mountain Qiaoba, water clarity. Therefore, when we enter the great mountains and rivers, when the eye to their own and experience, but experience is the art of pre-cultivation, the lack of such training, it can not be found the most beautiful side scenery. Kinetic energy of camera lens used to collect all landscape features of special lenses can have a visit to get some kind of documentary.

To create digital teachers – Fun paper production

Liushui — Thu, 16 Feb 2012 03:48:14 +0000

To create digital teachers – Fun paper production
Copies of the template for papers
The so-called rainy day, make a paper template to future contingencies, should be very smart, save each system volume must do repetitive tasks. So before the system volume, we may wish to analyze a paper should be some content: left sealed, paper title, the results table, with the whole question of the rating items indicating the number of pages and page number footer area, as shown in Figure 1 show. With these, basically even have a “professional”, right? Now we take a look at how to make a such papers.
Figure 11. Page Setup is usually the papers we use are octavo paper horizontally divided into two columns. So, first click the menu command “File → Page Setup”, click on the “Paper” tab, set the paper size “on” or “B4,”. Click the “Margins” tab, left margin value is set too large, such as “4.5 cm, bottom margin is set to” 3 “cm other margins are set to 2 cm. Layout direction is selected as the “horizontal”. Click the Document Grid tab in the number of columns, the value is set to “2″, so that you can test paper is divided into two columns. In general, in two columns of the papers, we will be coupled with the separator between the columns. So, click the menu command Format → Columns to open the Columns dialog box, select the “separator” rehabilitation option.
Two. The production of papers sealed line click on the Text Box button on the Drawing toolbar, papers in drag, a vertical bar-shaped text box. Its height with papers body of the same height and width you do not have too broad, and can lay down a line of words can be. Double-click the text box border, open the “Format Text Box dialog box, click on one of the colors and lines” tab, text box fill color and line color is set to “fill color” and “wireless bar color. ”
This text box is selected, click its border, the border filled by a slash into a small point fill. Click the menu command Format → Text direction “in the dialog box that opens, select the direction of the left-most styles, shown in Figure 2. Determined, in the text box, type “Name ____ Examination ____” text, set the alignment to center.
Figure 2 “straight line” button and then click on the Drawing toolbar to add a straight line in the text box to the right side of seal lines (you can hold down the Shift key and drag). “Linear” button to select this entry straight line, click on the Drawing toolbar, assigned to linear and width (optional 2.25 pounds of a single solid line). Select the text box and a straight line, click on the Drawing toolbar, drawing → Combination “” command, they are combined into an object.HP Probook 4720s battery Press the “Ctrl + X” key will shear it to the clipboard.
Now, we can click the menu command View → header and footer, and the mouse position in the header area of combination of good press “Ctrl + V to paste left seal area come. Its location on the left of the right place. Such papers in each one will be automatically added to the left of the seal area. Very convenient, right? However, the production is completed, do not forget the “Header” in the “Format” toolbar style to the text. Otherwise, the newly added one paper at the top will be a horizontal line, which is not what we need.
3. Indicate the number of pages and page numbers because of our papers are divided into two columns, so, we should be in each column below to add page numbers in order to avoid students missing subject. : Double-click the left column below the footer position, the footer edit mode. (Prohibition) a text box. The previous method, the fill color and border color for the text boxes are no color. Click on the border to enter the edit mode.
First enter the “page”. Positioning the mouse “and the word” page “in the middle, press CTRL + F9 key combination (Prohibition) domain of characters” {} “, where you can enter = {PAGE} * 2-1 . Pay attention to “{}” symbol can not be entered manually, only press “CTRL + F9 key combination. And then positioning the mouse in between the “total” and “page”, using the previous method, the domain characteristics of symbols, in which the input “= {the NUMPAGES} * 2″. Move the text box, enter the text exactly into the middle of this column.
Select text box, hold down the “Ctrl” key while using the mouse to drag it to the middle of the lower right-hand column. In this way, you can get one with just a text box identical to another text box. The field code = {PAGE} * 2-1 “replaced by” = {PAGE} * 2 “. Domain code in the text box is selected, right click and select “Toggle Field Codes” command in the shortcut menu. In each column so that you can see the effect of the “page x page x. To align the two-column footer text, select the two text boxes, click on “Drawing” toolbar “each other or distribution → Align Top” command.
4. The papers note of the partition and the production of the scoring area than the front part of the work is simply more. In accordance with their own ideas (Prohibition) form can be. Should be noted that the scoring area for each question in front of the table, we should select it, right-click in the shortcut menu, select “Table Properties” command, and then open the Table Properties dialog box, select ” Wrapping text around the way, and click the “positioning” button to the right, in the pop-up table positioning “dialog box, select the” with text “restore option. Shown in Figure 3.
Figure 3 papers used in the production process tools
We must first sharpen his tools. Production of the papers also have a good helper to do half and twice the A. Mathtype
Mathtype is a powerful mathematical formula editor, and use it,HP EliteBook 2760P battery we can easily enter all kinds of complex mathematical formulas and symbols, shown in Figure 4. It can save the edited formula into a variety of image formats, or transparent image format, you can easily add or remove symbols, expressions, and other templates (only need to simply use the mouse dragged out of the can). WYSIWYG, real convenient. You can download , @ ftp11.enet.com.cn: 88/pub/utility/teach/MathTypeSetup.exe at its 5.2 version. Support of this version of Word is very good.
Figure 4 After installation Mathtype, it will automatically replace with Word Equation Editor. You can click the menu command “Tools → Customize.” Click on the “order” tab in the dialog box that opens, and then in the left side of the category “select” (disabled), then select the “Equation Editor” in the list on the right, drag and drop it into the tool bar anywhere, shown in Figure 5. After you click this button to automatically run Mathtype.
Figure 52. Easily toolbox easily toolbox is a Word-based tool, specifically for writing teaching documents, preparation, and editing of papers, courseware, electronic documents, and office applications, generic tools. The tool to make up the Word editing process to enter a variety of disciplines dedicated graphics and symbols inconvenience regret, so that we no longer need to spend a lot of time for a symbol or graphic. It is based on Word platform, including language, English, mathematics, geography, biology, physics, chemistry, IT and other disciplines, contains more than 2000 long-term collection and carefully drawn by the author dedicated graphics and symbols, and continue to expand, such as Figure 6. With it, you will no longer worry as symbols and graphics input in the papers. You can download it to at its latest version.
Figure 6 a few practical tips
A. Papers answers hidden in the general system volume process, we will enter the answer in another file. However, many papers, it is easy to confuse. In fact, we can hide the answer papers.Dell Precision M90 laptop battery
: On the subject of the corresponding position directly enter the answer, select the answer part, click the menu command Format → Font, in the dialog box that opens, select the “hidden text” recovery option, and answer part of the input at this time not up. If we click on the “Tools → Options” command, and then click on “View” tab, and select the “hidden text” restore option, then hide the answer can be seen. However, you do not have to worry about, because these words can only be displayed on the screen, not print to paper. And the input text will not occupy the position of the title, you “print preview” what will understand.
If you want to print a answer papers for their own use, you also need to click the “File → Print command in the dialog box that opens, click on” Options “button in the dialog box that opens, select the” hidden text “complex option, shown in Figure 7.
Figure 72. Aligned multiple-choice questions in the various options before Enter the second line, the corresponding position in the horizontal ruler (Prohibition) tab stops. Press the “Tab” key to enter the first tab stop, enter “A.”, then press the “Tab” key to enter the next tab stop, type “B.” and so on, to finish the four options.
Positioning the mouse before the first line of hard carriage return, click the menu command Format → project symbol and number “in the dialog box that opens, click the Number tab, choose one numbering, and click to choose tab in the “Custom” button, open the dialog box shown in Figure 8. You can click on the icon to make the appropriate adjustments.
Figure 8 is completed, select the title number and the four options, copy. Enter D option to the next line, and then paste. Repeatedly paste, you can get a sufficient number of multiple-choice questions. Their options in the vertical direction is automatically aligned. 3. The answer, complete table
We do not always use a scoring machine scoring, so sometimes we would ask students to write-choice answers to a specified form. The table is a good painting, but the frame and fill out the Question very troublesome. In fact, we can select the cell to fill in the question number, then click Format → Bullets and Numbering command, click on the “number” tab in the dialog box that opens, it specifies the number of a pure digital style. Determined, those question will automatically fill in the selected cell, shown in Figure 9.
Figure 94. Save the template formatting is completed, we can save it as “the dot” format template file. Later production of paper, simply click on the “File → New command, and then double-click to save a good template.

A disadvantage of shooting in the indoor lighting is not ideal

Liushui — Thu, 16 Feb 2012 01:54:29 +0000

A disadvantage of shooting in the indoor lighting is not ideal, in most cases, indoor light will be too dark. At this time, the flash is obviously a very effective artificial light, powerful, and the use of diversification, but you can also shoot the scene when the effective use of existing light.

Built-in flash of light is often too weak, too cold, the recorded image will destroy the atmosphere of the whole environment. When shooting at 3 meters away, you have to use the exposure index of at least 36 to 40 external flash – you can flash to the understanding of friends or photographic equipment dealer to use your camera with flash devices and their performance.price of compaq presario v3000 battery Need soft lighting, you can also flash on the camera’s set-top or lateral, while using reflectors and diffusers for the lighting soft, it is because it can enhance the effective lighting area, with a side light to photos bright three-dimensional objects.

Large room in the shooting, you can use multiple flash or play a large aperture, the release of different locations in the room the shutter – this approach will be very difficult, especially when you do not have photographic assistant.

You can also use artificial light to replace the continuous flash, tungsten halogen light and light is a good choice, if the camera’s automatic white balance setting does not make you be satisfied with the results, you may wish to try several different white balance settings, If you can not use additional artificial light, you can only use so-called \ “an effective natural light \”, and they may be light shining through the window, it may not affect the normal artificial light photography. The advantages of using natural light effectively lighting the room is very natural.

Unless you buy very cheap camera, otherwise you’d better choose the exposure time (determined by the shutter speed) in 1 / 500 to 1 or 2 seconds the camera, but can choose as many different aperture, the camera itself qualifications to enable you to shoot indoors in the dark possible, but also capture the effect was very good photos.

It is noteworthy, however, indoor shooting, it is best to turn off the flash, while the camera on a tripod, otherwise the picture will become blurred. There is no tripod, you should also be possible to find a stable anchor, these methods although there is not one good effect, but also appropriate because of the camera shake caused by the reduced image blur. When the shutter is released, the camera against a hard object – benches, pillars or walls, only thing is solid on the line, and then very gently press the shutter release button. If possible, self-timer can also be used to release the shutter.

In poor light or when shooting unstable environment (such as prohibiting the use of flash site),battery for NIKON en-el5 the only option is to increase the sensitivity, high-end cameras have \ “to force sensitization \” feature, you can from a series of ISO values choose from double or quadruple speed. However, this method will greatly affect the image quality. Which, of course, this is to avoid image blur caused by shaking the only way, especially in the free activities taking pictures or shooting when your subject is particularly useful.

When shooting photos of people in the room, we often use the built-in digital camera flash for fill light, but if not properly use flash light, often left behind in the main characters ugly shadow, seriously affecting the photos of the beautiful. So, how to avoid or reduce the occurrence of this phenomenon flash shadow of it?

Let people as far away from the wall or object

Projection based on the principle of light, when characters from the walls or behind objects closer, the interior lights and the original can not be irradiated or reflected natural light to the people behind the walls and other objects, when a strong light flash light, it will be taken so that people behind the walls and other objects left on the heavy flash shadows. Therefore, in the case does not affect the composition, so that people as far away from the white wall or behind objects, with sufficient space and distance, the shadow will be significantly reduced flash.

Choose a bright background

When shooting indoors, we can use natural light as the background under bright windows and doors can also use lamps and other lighting equipment available for people to be taken to create a bright background, choose the right camera angle, so that the shadow of the flash will disappear in a bright background.

The location of the camera to be higher

When using the flash indoors, the camera position is higher,ACER Aspire 5732Z laptop battery are some, such a flash behind the projector is in the figure below, will be part of the subject were blocked, it seems less obvious, minimize the use of head-up or looking up the machine digital photography. In addition, to avoid the composition vertically, as when shooting vertically, rotate 90 degrees to the camera, the flash in the side position, make it easier for some people fall on the side of the flash shadow in the background and characters on the left side of a contour line The thick black shadows. Banner in the photo shoot, the flash light source is above the issue from the lens, the projector weaker more.

Properly cover the flash

As small interior space, shooting from close, the use of flash is not only easy to cast a shadow on the face but also make the characters white, then, we can use the white gauze, paper towel stockings and even the role of the occluder with astigmatism proper shelter flash, the flash light becomes softer. Use of gauze and other items will be pasted with adhesive tape out of the flash (be careful not to block the hole and focus the viewfinder), a layer of soft, if not satisfied, you can add two or even three. However, cover the flash, the flash illumination will be reduced, thus increasing exposure to the appropriate value.

Use slow sync flash mode

Indoor use of flash photography, in addition to the flash of light, there will be injected into the natural light from windows and doors interior lighting, only because the latter two sources is weak,price of TOSHIBA PA3399U-1BAS battery can not let the main characters have enough exposure. We can use the slow sync flash mode, use flash light to illuminate the main characters, and then use a long shutter (1 / 15 ~ 1 sec) the other still life shooting indoors, you can use indoors to weaken the original flash of light leaving under the shadow. Best to use a tripod when shooting can also be fixed using tables and chairs and other objects, digital cameras, to prevent vibration when shooting while people were taken to maintain the original position after the flash lit until the shutter is closed.

Lighting method using reflection

You can adjust the direction of the flash or external flash can be used (installed on-top) of the digital camera, the flash head towards the people or the side opposite the ceiling, walls and other white reflective material, the use of a reflected light illuminates the subject person . This reflected light can change the direction of the flash, from the top of the front light or light into the former before the side light, and similar natural and soft light scattering. When this method to avoid the use of the colored surface, because its reflected light will cast a special color photo. To add flash from the camera as much as possible on top of a higher position, the reason for this is to make the strobe lights similar to the subject’s point of view angle of the sun, so that the shadows behind the subject naturally falls, and the shadow will not be annoying. This method is also impairment of light, of course, need to pay attention to the accuracy of the exposure.Dell Inspiron 9400 Replacement battery

When shooting portraits, no matter what the use of light, as long as the person in front of the subject and have enough brightness, will be reflected on to the eyes, appear reflective points of light to form eyes. Reflection points shown in the eyes, in shape, size and location is always different. For example: the indoor portraits, the light from those far away from the subject shining through the window, his eyes each window will appear bright shadow; use flash on the camera, it will cause in the eyes of a small central white point; the use of reflectors or reflective umbrella, it will form a reflection area, this reflex is usually to one side.

Forget to restore the SSID – the wireless network can not even

Liushui — Wed, 15 Feb 2012 03:36:22 +0000

Forget to restore the SSID – the wireless network can not even
Not long ago, Mike, take a notebook to a friend’s house to play, a friend’s house using a wireless network, so Mike will connect the notebook to his wireless network Internet. Can be home, Mike has found in your own home with this laptop can not connect to home wireless network. This is why?
Mike was soon ruled out the possibility of hardware failure can not access the Internet, home desktop function normal Internet access through a wireless router, it appears that the network service provider should be no problem. That in the end is what causes can not access it? After careful analysis, Mike found that this failure is the SSID (wireless network ID) forget to restore the lead.Compaq NX9010 battery For example, we go to other wireless networks in the Internet with a laptop, the SSID must be modified to the wireless network SSID name in that environment before. After use, but also to change the name back, in order to use the original wireless network environment.
Here we give a concrete example, the D-Link DI-624 + router, for example, the default factory settings of the wireless network ID (SSID) for the “default” (see photo), the first use, if you do not modify The notebook computer will automatically search for wireless network signal “default” and connect automatically.
However, if you are on the router for wireless network ID changes, such as changed to “the wireless”, then there will be not normally connected to the network.HP G65 battery Then you can click Wireless Network Connection icon, and then under Network Tasks, click “View Available Wireless Networks”. Then the left side, under Related Tasks, click Change the order of preferred networks “. Click a wireless network, and then click “Move Up” or “Move Down” to change the order of the wireless network connection. Change is complete, you will find that the Internet can be normal. Therefore, in the wireless environment If you forget to change the wireless network ID (SSID) back to their logo, then, it will be unable to connect to the wireless network failure.
Small knowledge: What is the SSID? SSID (Service Set Identifier), can also be written as ESSID, wireless AP or wireless router is a sign of character, sometimes translated as “the business group identifier, the service set identifier” or “service area identifier”.Compaq TC4200 battery The flag is mainly used to distinguish between different wireless networks, up to 32 characters. The factory default value is “default”.

So after-sales, Konica Minolta and I am

Liushui — Wed, 15 Feb 2012 03:28:39 +0000

So after-sales, Konica Minolta and I am
I was a company computer maintenance personnel, due to the company’s business has developed rapidly, computer office applications requirements increase as the original use of inkjet printers has been a bit powerless, so in the end of 2004, purchased a Konica Minolta up to a laser printer, model 2300W. See this color laser printer of the leaflets described above, the performance is also decent, the price of 4000 yuan at that time regarded as relatively cheap, and businesses to introduce this color laser printer to use, relatively inexpensive supplies. Used for the first failure
Initial installation of the printer is of course the dealer is responsible for the staff two or three erupted put the accessories are installed. Although it is a color laser printer,Toshiba PA3465U-1BRS replacement battery but Konica Minolta 2300W does not look stylish, square. Machine itself was equipped with a parallel port print line staff with a USB print line over, saying that the use of time in case of need. I feel USB cable “advanced” point and supports plug and play, so I believe the staff put on a USB print line. Then is to install the driver, the machine comes with CD-ROM into the CD-ROM drive, jumped out to an interface, suggesting that the press “OK” to install, the installation process without prompting what to pay special settings, there is no error, very well to complete the installation, print a test page to show me a very clear, but goes on the test page waiting for a long time to come out.
Company’s equipment is the sharing of resources, so I share a printer on the network, colleagues heard the new printer is fast and clear print, we are using this machine to print. Who knows after a few hours, the printer will not work, the print queue which came in several files waiting to print, the top of the file seems “stuck”,HP G65 battery the status bar error, the window of the driver itself with monitoring turns red, and a message to say “Please check your power supply or computer cable is connected properly, restart the computer, they can continue to use normal green tips. With a few days, found that this problem will always appear, sometimes several times a day, sometimes there will be continuous printing dozens of pages of information. Can not stand, so I called the dealer service personnel over the repair, he checked the machine, said machine no problem, so I changed to a USB print cable, said cable. I hold the dubious mood was observed for several days, found that the situation does not improve. So I contact that dealer response is that you try again or we ask the engineers, and then let the matter rest. For technical support to understand why
Is not the case, I think that Konica Minolta has a 800 toll-free consulting, so try to call the past to ask. I put that machine them out, and the technical staff some advice to me, which I think more constructive to my USB cord into the parallel port print line. I USB cable replaced with a parallel port print line as he said, with a few days and found that the situation has improved, probably the problem the number of times less than before by about half.
Konica Minolta 2300W interface such a situation continues for several months in 2005 when the company needs to buy a color laser printer, the leadership taking into account cost, to buy a Konica Minolta 2300W Color Jida. With a period of time to buy a new printer the same situation. So I call again to Konica Minolta’s help, this phone is a technical staff, I re-tell him again. This time the technical staff is very straightforward, 2300W This printer does have this problem, this model is not suitable for network print sharing, described in the readme file of the driver, this model memory little, if more, then print the file may appear out of memory, and printer disconnection if users need to share a printer,Compaq NX9010 battery buy a model with network printing capabilities “. This said very clearly, but I am puzzled, two or three hundred dollars inkjet printer can support print sharing, print sharing printer is one of the most basic functions, spent 4000 yuan purchase of color laser printer actually can not support shared printing. The key is in the purchase of the former dealer did not say any hints, packaging machine does not support shared printing.
Shameful after-sales service, then I played several phone calls to Konica Minolta asked several different people to answer almost all, say that this model does not support shared printing. I asked is there a way to solve the problem of shared print, they said no way. I asked you such defects should inform consumers. They say there is a readme file in the driver installed, which referred to do not support shared printing. So I carefully read the readme file that text files are in English, but fortunately my English level is not bad, my entire read, did not see such a word. Even if this sentence, also just purchased a printer installed on the driver can see, this is not to deceive consumers? Later anti repeatedly hit the end of the phone in the past many times the roots of the purpose is to solve the problem, may Konica Minolta 800 telephone operator heard come to my voice, and said less than two words, simply hang up my phone. I found online Konica Minolta’s China headquarters in Tel Surprisingly, found on the Internet, or 800 calls, so I call back, trying to find the responsible person or department heads, but the operator gave me the reply is: “our side there is no competent manager is not responsible for the after-sale thing.battery for Toshiba PA3465U-1BRS battery
” This really did not hope, do not reply to such a large company, to the customer is so irresponsible, a “no way” the matter?
Editor: The current competitive market, one of the business strategy to launch low-priced products are also manufacturers, this is nothing wrong. Should be noted that these low-priced products are often made some “concessions” in the product features or performance. These products are not suitable for most users, they are often only for specific user groups. As a business, be obliged to inform the consumer of the product characteristics, and the maximum to avoid consumers make the wrong choice. From Konica Minolta color laser printer events, Konica Minolta, and not in the product packaging, brochures and prominently marked products for network print sharing, or other precautions, and the driver readme file tend not to ordinary users of concern, not to mention English. Plus dealer bent on increased sales, not for the users to consider, and ultimately cause consumers to make the wrong choice.
Belden pretend a user dials 800, Konica Minolta, ask 2300W support network shared printer? Consumers before buying how can we know it does not support shared printing? If you buy after the discovery of how to do? In addition to clearly tell the 100 through 2300W does not support shared printing, and other issues did not get a better answer. As a disadvantaged group, the consumer has the right to know the characteristics of the product before purchase products to make it clear that the PC and other peripherals sold within 15 days, consumers have the right to a replacement computer Three Guarantees. Estimated that the author Fred is not within the specified time the timely processing of the problem, delay in time to make their rights lost hope that readers encountered a similar problem of attention should be given rights!

SMS can also “call forwarding”

Liushui — Tue, 14 Feb 2012 03:25:09 +0000

SMS can also “call forwarding”
We all know that the phone has a call forwarding feature, set up call forwarding on the phone and forgot the phone or run out of battery, the phone will automatically transfer to the number you specify. SMS can not be transferred? Unfortunately, regardless of things Mobile, China Unicom, or telecommunications, are not of this service. But
, We can through third-party software on their smart phones for message transfer.Compaq TC4200 battery
Windows Mobile phone users can use SMS transfer master “forwarding.
The download will unzip all the files copied to the phone, running on the phone SMSForwarder.exe normal will only prompt the software installation (see Figure 1). Then another one mobile phone to send text messages “0 #” to install the software for mobile phones. Wait to send text messages of the “remote control” phone
Will receive a feedback information for the command executed successfully: 0 # “,HP Battery Mini 5103 indicating you’re done. Later sent to the SMS on this phone will be a copy, concurrent sent to this “remote control” on the phone!
If you want to completely cancel the SMS forwarding feature, as long as the “remote control” on the phone to send “#”, wait a moment, the remote phone will receive command tour: 5 # feedback, will stop forwarding (see Figure 2).
Tip: send the command SMS need to use the “#” and the number of half-width English,Thinkpad T61 Battery if you use a Chinese symbol will not be successful.
Important: SMS transfer master “software for the convenience of users remote in the case of left her phone to receive text messages, must not use improper means to spy on other people’s privacy!
If your phone uses the Symbian S60 v2 system, you can also install the SMS transfer software SMS ForwarderLite “(download address: as set the phone call transfer, as convenient to set up SMS transfer
Number (see Figure 3).
Tip: SMS forwarding principle is the way the software automatically forward received text messages, turn every time you want to charge a fee of 0.1 yuan, and only when the phone is switched on to be effective.

High-resolution digital cameras, can be said that anyone needs

Liushui — Tue, 14 Feb 2012 02:34:52 +0000

High-resolution digital cameras, can be said that anyone needs, but at the same time, the price of digital cameras are often in direct proportion with the improvement of the resolution to rise,battery for TOSHIBA PA3457U-1BRS but also restricts people’s high-resolution digital camera needs, so choose resolution and share prices were to seek an optimal balance between.

In considering the resolution of a digital camera, just enough to consider the time of purchase on the line, with objects of different options, the required level of general pixel digital cameras are:

1, some of the pixel digital camera CCD chip total will be far higher than the actual recorded image pixel level, which means that some pixels on the CCD chip is not always utilized in the purchase of digital camera, on the CCD chip enough to be in line with the principle of pixels.

2, only the image capture web pages,price of Sony PCGA-BP2V battery resolution of 640 × 480 can.

3, shooting for print or through other ways to get the photos on paper as the carrier, the digital camera’s resolution should be high not low, it is best to use professional-grade digital camera; to be processed into a huge picture, battery for Dell LATITUDE D500it can be said to buy another high pixel The digital camera was not wasted.

4, after buying a digital camera, if used for a variety of shooting, shooting requirements should be determined according to the highest resolution level to buy a digital camera.

5, shot only for the computer display screen,price of APPLE A1181 battery the computer-resolution digital camera match the resolution of the monitor or close to. If for the VGA display, a 640 × 480 resolution on the list; if for XGA display, the resolution of digital cameras in 1024 × 768 or so can.

System (a)

Liushui — Mon, 13 Feb 2012 08:48:21 +0000

System (a)
Q1 Why are not formatted the E drive
Q: My system is Windows XP SP2, all programs are installed in the C disk, do not open any E-disk file, but when I formatted the E drive, the total prompt: Windows can not format the drive. Exit all use the drive, disk utilities or other programs … This is the reason?
A: did not open the disk E program or file does not mean that the system did not use the E disk file, the current anti-virus software is background detect E disk files for viruses, or install a desktop search tool (such as Google Desktop) is the index E disk file, then you want to format the E drive will appear above tips. The correct approach is to restart the system and press F8 to enter Safe Mode, and then to format the disk in safe mode, and will not appear on this phenomenon. In addition, many of my friends has a WinPE CD-ROM can also be used directly WinPE CD-ROM boot the system, and then to format the disk in WinPE system operation would not be a problem.
Silly Dr. something to say:
Many novice friend mistakenly grid format the disk, disk partition, because the operations are not familiar with, especially in the use of low version of the system installation CD to start the system to DOS mode, use the Format command to format in DOS environment does not recognize NTFS-formatted partition, mistakenly format the other partitions,Toshiba PA3480U-1BRS battery resulting in data loss. If the non-Windows operating system, disk format operation, it is best to first use the the DIY command to view the file under the partition to determine if there are problems. Or in peacetime to a WinPE CD-ROM format to format the disk in the WinPE environment to avoid misuse and lead to loss.
Q2 hard disk space is large but can not save the file
Q: my D drive free space, there are more than 10 GB, but from the downloaded file saved to the D drive, the system will pop-up prompts that do not have permission or not enough free space. Is this what is the reason?
A: If the remaining disk space is very large indeed but to save the file when prompted not be saved, the disk partition may be using the NTFS format and write access to the restrictions for non-administrator user can not be to the partition written to the file a. Solution: try to save the file to another partition, or use administrator privileges to log into the system, then re-set the permissions of the partition: Right-click the partition and select Properties, open the Settings window, select the “Security”, next directly to the account settings you usually use “complete control” permission to save your settings. (See photo)
Q3 why prompt diskless
Q: I am using Windows Vista, and recently in the course often will suddenly pop up a title for the “no disk” error dialog box, after the closure of the system can be used normally.Thinkpad T60P Battery Is this what is the reason?
A: This phenomenon, nine out of ten are partially installed software uninstall is not completely related, and such software may be added to the system Task Scheduler entry when the implementation of these tasks as it has been to find the corresponding program files, so “no disk” error. Please check the relevant item from the Start → Programs → Accessories → System Tools → Task Scheduler, open Scheduled Tasks list, look at the corresponding program is deleted, the corresponding program has been deleted, as long as the task to delete the future will not appear on the fault.
Q4 dual boot menu disorders
Q: The previously installed Windows XP and Windows Vista dual-boot system, Vista system is installed later, after the last trial a partitioning software destruction of the start menu, repair of which one but the other one not get. Only use XP, the boot appears the Vista, but Vista menu is selected into XP. Is this what is the solution?
A: For Windows XP and Windows Vista dual boot menu fails, the easiest way is to use the tool to repair. To repair from the Download dubbed “VistaBootPRO” program, run and click the Manage OS Entries “button, select Windows Vista, in the following set the installation of the Vista system partition, then click the “Apply Settings” button, you can if you still can not solve the problem, please re-run the program, click the “System Bootloader” button, then select “of Windows Vista Bootloader” and then click “Install Bootloader” button to reinstall the boot components to solve the problem. (See photo)
Q5 each time you restart the Quick Launch bar will disappear
Q: XP desktop I will some of the commonly used program shortcuts on the Quick Launch bar, but every time you restart the system after the Quick Launch bar will automatically disappear from the task bar, had to reset the Show Quick Launch bar the job, But the next time you restart the system and then disappear.Toshiba PA3480U-1BRS replacement battery Is this what is the reason?
A: First of all, press Win + R Open the Run dialog box, enter “gpedit.msc” and press Enter to open the Group Policy Editor, expand User Configuration → Administrative Templates → Taskbar and Start menu, double-click is not the task bar display any Customize Toolbar “” Disable “to save the settings and reboot the system. If still not OK, please select the “User Configuration → Administrative Templates → Desktop Group Policy Editor, double-click Exit to save the settings” and “disabled”, save and restart the system.
The XP system can not modify the theme
Q: I used before line presentation to crack the system theme, and now want to replace a desktop theme or change the desktop back, and will always pop-up “Rundll32, has encountered a problem shut down” prompt, you can not successfully modified. This is how to solve?
A: This is Rundll32 file in your system has been destroyed can not lead to work, try from another system with the version in the system tray \ Windows \ System32 directory copy the Rundll32.exe file and restart the system, press F8 to switch to cover the damaged file in the directory of the same name on their own system in safe mode, and then try to modify the theme is likely to succeed. If you just can not modify the desktop background picture, to see if it limits the optimization class tools to modify the desktop background: open the Group Policy Editor, select the “User Configuration → Administrative Templates → Control Panel → Display → Prevent changing wallpaper” key and set it as “disabled”.

Spring Outing Photo “Moving”

Liushui — Mon, 13 Feb 2012 03:06:35 +0000

Spring Outing Photo “Moving”
Spring trips to the MM took many pictures, change the background, whitening, microdermabrasion (that is, the skin becomes tender) has not let MM interested. Photo of the Year of the Ox make MM’s mouth to speak, but also on the photo to me wink, tongue, giggle grimace.
Three-step join the action
First step: start CrazyTalk , select “Project” next to the Open button in the template project, select a project and open the default (software Ms. template directly into the role of editor), open a project. Switch to the “role” column, click on the right side of the picture icon into a picture.
Step two: open the “image processing” dialog box, click the right side of the marquee button, drag the mouse to select characters in the picture,HP EliteBook 8740W battery in order to edit the expression. Click Next, and then enlarge the picture, according to the schematic diagram 1, 2, 3, 4, the signs were moved to the appropriate location of the photo (see Figure 1).
Step 3: Click Next to enter the silhouette of the edit window (the characters become the key Oh 2.5D), select a suitable portrait naturally click on the “Human (people)”,battery for Toshiba PA3534U-1BAS battery set in the right contour strength and dynamic strength, then move the mouse figures will be followed by action, we see this setting, the characters have much action, in order to adjust the parameters, usually two intensity are not too large, set up press “OK” can. Click the “Play” button, Then you can see in the preview after the dynamic character of our animation will mostly do a good job, it is amazing!
Perfect performance to be modified
Step 1: If you feel bad, then click the “role” option to the bottom of the Advanced Face Recognition “, switch to the eye teeth, lips set the details of each of the adjustment can click on the arrows below adjustment (one-click adjustment is very tiny,Dell Vostro 1320 battery you can press and hold to adjust), adjusting press the “OK” end.
Step 2: Switch to “script” under the column, the software pop-up face even the control panel, select the right model of the facial muscles that you want to change, click the “Record”, then press the “space” in the character image pull the mouse to control the character expression, and then press the “space” to end recording.
The third step: the effect of satisfaction, click Export, and then specify the type, video, pictures, FLASH or mobile phone format, so that you can use on different occasions. Resize, click the “Export”, choose the right path and save it,Thinkpad R50 Battery
we’re done!
Tip
Where the settings need to be careful, very critical with the teeth, or easily deformed, provided the teeth are mostly inappropriate, we can post adjustment, select a tooth width is not enough, then drag a “proportion” of the first slide block, so that the teeth become sparse can be (see Figure 2). Short and long to adjust the length of a single tooth! If there is no suitable, but also understands the PS, you can own the interception of a tooth picture, and then click “Import” to import to. Of course, dealing with eyes.

Pure flash drive version of antivirus software

Liushui — Fri, 10 Feb 2012 06:35:38 +0000

Pure flash drive version of antivirus software
To create a pure flash drive version of NOD32 is need the weapon UniExtract (a can be disassembled MSI installation package software),and then download NOD32 installation file, download addresses:
Step 1: UniExtract download to the local, unzip to any directory open UniExtract.exe file, select your NOD32 installation files, and then all the way “OK, so you can the eav_nt32_chs folder.
Step Two: eav_nt32_chs file folder to “anti-virus software, copied to the flash disk root directory, here assuming that the flash drive letter J,HP EliteBook 8740W battery This completes the preparations for production of pure flash drives anti-virus software.
The third step: we have already completed the preparatory work for production of pure flash drive antivirus software, to use it, how to do it? First insert the flash drive, open the directory of the anti-virus software.
Step 4: Open the the directory eav_nt32_chs.msi file, this file is not the same as the beginning of the NOD32 installer, it is now less than 900KB, which contains the the NOD32 necessary registry file and the two system services.
The fifth step: run eav_nt32_chs.msi file can not be all the way “Next, there are several key steps to setting them out now. First of all, this step in the “Select installation mode” to select “custom”; Second, this step in the “Select Installation Folder”
eav_nt32_chs.msi file folder (ie J: \ anti-virus software, computer, flash drive letter will be different); again, this step in the “Configure Automatic Updates Configuration” If the upgrade file Upgrade “,”HP Pavilion N5221 battery Never restarts the computer, “the two (see Fig.
), So that, NOD32 can be automatically updated. Then has been the “Next” until the installation is complete. NOD32 will automatically start. Monitoring mode, graphical interface antivirus nowhere.
As for how to protect NOD32 free from viruses, most viruses are NTSD command to force the end of antivirus software process, so long as the blacklist of NOD32 to join NTSD.EXE can (the file in the system32 folder). But this program can not be inserted flash drives on startup
NOD32, a little disappointed.
Xiaobian something to say: a lot of discussion forum for this question, in many ways, just perfect and still has not appeared, before we have a program, this by wangyiping1996, another way may help From another point of view to solve this Xiaobian offer train
Where part of the money to the store to buy things, the JS is the easiest? Most likely to suffer fooled? Estimated knowledgeable industry people will tell you – accessories. Indeed, accessories this water deep, and JS are mostly in it to do something to let you keep track of.
Digital products, JS, usually with a very low price to attract you to buy, and then in turn sell accessories, such as a compatible battery, bag, card, film, etc., to earn high profits.
Before the little special to hear the JS comes to a buyer in the purchase of a PSP, the original battery replaced with a high imitation battery trick.
These prices are just a small special consultation with the results obtained after several sellers may have a greater discrepancy in the different regions and channels, only available here as a reference.
Gift accessories
Remember at the end of 2007, I purchased Nokia 6120c cell phone, business promotion, in addition to mobile phone original accessories, Toshiba PA3534U-1BAS replacement batteryand then “send” big gifts – an original battery, a 1GB TF card, a TF transfer SD card sleeve and a SD card reader (the reputation of its saying is sent, in fact, the money already added
Concentrate on testing the phone, did not carefully check the four-kind gifts, home after …
The original battery: battery original touches are not false, but the 6120c using the BL-5B battery divided into two, the old section is 820mA, but when I bought have all been updated to 890mA. Unfortunately, sent this just the old models …
1GB TF card: write speed is about 3MB, the speed is still quite slow …
Kaka sets TF to SD: poor contact, bought back more than plug a few times but also with later broken.
SD card reader: can not use …
The painful lesson! From that point on, when I buy things, also particularly attention to detail.
Foreign garbage invisible injury
Early years, I have bought an international brand of wireless, ADSL MODEM and routing three-in-one router, merchants said that is powerful, cheap, and excellent performance. Results I bought one with problems: more than the flow is broken, can not open the UPnP, and obviously the Chinese network
Support the poor, the wireless BT extremely slow, in short,HP Pavilion N5300 battery is a lot of problems ..dell 90w ac adapter
.
Finally, when I can not stand, and finally it replaced, spent more than 400 yuan to buy a wireless router, the problem is considered solved, and the determination of foreign garbage must be careful to buy!
Finally, do a little advertising, order to prepare the 3.15 topic especially during the Spring Festival, a special trip to Zhongguancun Station a few days the counter, to experience a few days the store of life, of course, the period also witnessed the notebook transition, and accessories to make money living JS technique “. One of the interesting content, a small special The blog is updated